Tag: ZedBoard

Just a short recipe on how to compile 'tslib' and use it with Qt5 on Xilinx Petalinux. At the moment I'm using Ubuntu 14.04 64bit as a host machine, MicroZed 7020 as a target, Xilinx Vivado version 2014.2 and Petalinux …

Configure and build Qt5, tslib and evtest for ARM (Xilinx Zynq). Read More »

Tagged with: , , , , , , , , , , , , , , , , ,

I finally received my FLIR One!!! It's kind of expansive, but very cool infra-red camera for IPhone5/5c. Can make still and video. A very nice toy :) It has two sensors/cameras and as I understand one is infra-red and another …

FLIR One. Read More »

Tagged with: , , , , , ,

I finally figure it out why Analog Devices reference design create/generated in Vivado 2014 by script(obviously updated to use new IP's, otherwise it didn't assemble 'Block Design' at all) didn't work. Reason is changes in Xilinx Concat IP, which used …

HDMI on ZedBoard with Petalinux update. Read More »

Tagged with: , , , , , , , ,

This is step-by-step tutorial on how to build reference design for Analog Devices ADV7511 HDMI encoder used on ZedBoard with PetaLinux 2013.10. It will be mostly based on AD HDL reference design http://wiki.analog.com/resources/fpga/xilinx/kc705/adv7511 and AD Linux drivers wiki page http://wiki.analog.com/resources/tools-software/linux-drivers/platforms/zynq …

HDMI on ZedBoard with Petalinux. Read More »

Tagged with: , , , , , , , , ,

A small, step-by-step tutorial on how to create and package IP. Just as an example, I will create 3-to-8 decoder IP in Xilinx Vivado 2014.1 and connect it to Zynq SPI chip select pins. This is not a Verilog tutorial, …

Howto create and package IP using Xilinx Vivado 2014.1 Read More »

Tagged with: , , , , , , , , ,

This is the small howto describing export of some peripherals on ZedBoard's PMOD connectors. ZedBoard have some, so called, FIXED_IO connections, which is hardwired to DDR memory, QSPI flash memory, Ethernet and etc. It also export Zynq UART1 to J14 …

Howto export Zynq peripherals(I2C, SPI, UART and etc) to PMOD connectors of ZedBoard using Vivado 2013.4 Read More »

Tagged with: , , , , , , , , , , , , ,

Update for Qt 5.3.2: http://blog.idv-tech.com/2014/10/15/building-and-configuring-qt5-tslib-and-evtest-for-arm-xilinx-zynq/. This is a small how-to build latest Qt 5.2.1 for Zynq and use it with PetaLinux 2013.10 projects. I'm using 64 bit Ubuntu 13.10 as a host, with Xilinx Vivado 2013.4 and ZedBoard 'Rev. D' …

Howto build Qt 5.2.1 for Xilinx Zynq. Read More »

Tagged with: , , , , , , , , , , , , , ,

While waiting for my custom TFT panel board to be build and Zynq IP created, I'm decided to go ahead and build Qt libraries and start porting application. In order to test my application I need linux video framebuffer of …

The easiest way to add screen to ZedBoard. Read More »

Tagged with: , , , , , , , , , , , , , , ,

One of the many nice features of Xilinx Zynq is ability to run it in Asymmetric MultiProcessing or AMP configuration. Xilinx released version v2013.10 of a UG980(Petalinux Board Bringup) and UG978(Zynq Linux-FreeRTOS AMP) guides for Xilinx ZC702 board. Today I …

ZedBoard Linux-FreeRTOS AMP Board Bringup Guide. Read More »

Tagged with: , , , , , , , , , , , , , , , ,

Up until now, I was using JTAG to boot my ZedBoard using PetaLinux builds. But at some point we will neet to switch to QSPI or SDCard. This post will be about using SD Card. And PetaLinux 13.10 made this …

Use SDCard to boot ZedBoard using PetaLinux 13.10 Read More »

Tagged with: , , , , , , , , , , , ,

PetaLinux 13.10 coming with U-boot vesrion 2013.07 and Linux Kernel 3.8.1. If for some reason you need to change U-boot and/or Linux kernel with newer one - u can do it manually(configure, compile and include to BOOT.BIN image) or using …

Update U-boot and Linux Kernel for PetaLinux 13.10. Read More »

Tagged with: , , , , , , , , ,

Just a picture from Xilinx.com describing new design flow for PetaLinux 13.10 with Vivado 13.x. Helped me alot to figure out changes from previous PetaLinux releases. Like Dislike

Tagged with: , , , , , , ,

I will follow Xilinx UG976, UG977 and UG978 user guides v2013.10 revision. 1. Install fresh Ubuntu 13.10 (64 bit edition) in VMWare Workstation10 virtual machine with atleast 80G disk space and 4G of RAM. 2. Go to Xilinx.com and DigilentInc.com …

Installing Vivado 13.4 and PetaLinux SDK on Ubuntu 13.10 amd64(64 bit) for ZedBoard. Read More »

Tagged with: , , , , , , , , , , , ,
×