xyhz12345: Just select whole port, not individual signals and make it "external".
On Howto export Zynq peripherals(I2C, SPI, UART and etc) to PMOD connectors of ZedBoard using Vivado 2013.4
I'm using UbuntuBase(arm gnueabihf-) as a rootfs for development. It doesn't have all the packages available for Ubuntu amd64, but…
On Configure and build Qt5, tslib and evtest for ARM (Xilinx Zynq).
Well, your U-boot settings got screwed somehow. Try to google it. Maybe try to reset them to defaults.
On ZedBoard Linux-FreeRTOS AMP Board Bringup Guide.
What kernel version did you try?
On ZedBoard Linux-FreeRTOS AMP Board Bringup Guide.
1. From your Linux distro. Using RPM for RedHat or apt-get for Ubuntu. 5. Never used it myself, but where…
On Howto build Qt 5.2.1 for Xilinx Zynq.
Check out my latest post on Qt: https://blog.idv-tech.com/2014/10/15/building-and-configuring-qt5-tslib-and-evtest-for-arm-xilinx-zynq/ 1. You have to install 32bit version of libstdc++ for your distro.…
On Howto build Qt 5.2.1 for Xilinx Zynq.
Well, from what I can see - you most likely have either hardware design issues and/or incorrect device tree. 1.…
On HDMI on ZedBoard with Petalinux.
Lots of warnings is typical for HDL tools, but not errors or timing violation. Open implemented design and go thru…
On HDMI on ZedBoard with Petalinux.
At which point it gives you this error message?
On HDMI on ZedBoard with Petalinux.
Most likely changes in Kernel 3.18 and later causing this problems. Everybody getting all kind of problems with inode right…
On HDMI on ZedBoard with Petalinux.